DIY Tankless Mosquito Misting Systems image and description

If you have a big yard with a lawn and flowers, a DIY misting system for a greenhouse will provide you with fresh air and vegetation. For building you must have a misting kit, a programmable watering timer and hoses. The length of the hoses depends on your area. You have to connect the water supply and the programmable watering timer by means of a hose. The other pipe lays from the timer to the greenhouse, flowerbed or lawn, and is ended with the misting kit. This basic circuit can be adjusted with a programmed moistening schedule, depend on seasons changing. The watering timer can be replaced by a humidistat solenoid valve to start or to stop the humidification depend on the air humidity, or by a thermostat valve, based on temperature. A PVC misting system DIY will prevent the installation from the heating under the sun. For the purpose you can bury the pipes, but it takes a lot of efforts.